| 產品快速搜尋 |
與我們聯繫
| Model |
KDS-120 |
KDS-270 |
KDS-260 |
| No
of Syringe |
2 |
4 |
4 |
| Syringe
Size |
10 ul - 140ml |
10 ul - 60ml |
10 ul - 60 ml / ea |
Continuous Cycle Syringe Pump
The KDS270 can hold up to four syringes and can cycle continuously back and forth in a push-pull action. As two syringes are infusing, two syringes are withdrawing at the same rate. At the end of the set volume the direction is automatically reversed and the next cycle begins. With the use of 3-way valves the pump can empty and refill syringes for a continuous dispense
Features :
Holds four syringes, 10 ul to 60 ml each, With larger syringes the full volume may not be useable. [60 ml syr - 40 ml useable, 30 ml syr - full]
Backlit LCD display Knob locks/unlocks drive block for effortless, drag-free
adjustment
Simple menu-driven setup:
select syringe size from displayed table
dispense volume
dispense flow rate
Continuous dispense volume display
Preset volume control and automatic shut-off
Settings can be reviewed or changed during operation
Stall detection
Choice of unit selection
Last settings stored in permanent memory
Built-in RS232C interface for computer "daisy chaining" up to 100
pumps
TTL interface for foot switch, timer, relay control, outputs for run indicator,
valve control.
| Pump Type: |
|
| Max. No. of Syringes |
|
| Syringe Size |
|
| Dimensions |
|
| Weight |
|
| Linear Force |
|
| Advance Per Microstep |
|
| Max Step Rate (1/2 Step) |
|
| Min Step Rate |
|
| Accuracy |
|
| Syringe |
Minimum |
Maximum |
| 10 ul |
0.001 ul/h |
22.98 ul/h |
| 25 ul |
0.001ul /h |
0.884 ul/h |
| 50 ul |
0.001ul/h |
105.8 ul/h |
| 100 ul |
0.001 ul /h |
212.6 ul/h |
| 250 ul |
0.001ul/h |
527.6 ul/h |
| 500 ul |
0.001 ul /h |
1.06 ul/h |
| 1 ml |
0.001 ul/h |
2.203 ml/h |
| 3 ml |
0.001ul/h |
7.36 ml/h |
| 5 ml |
0.001ul/h |
14.33ml/h |
| 10 ml |
0.001ul/h |
20.91ml/h |
| 20 ml |
0.001 ul/h |
36.19ml/h |
